The SF100 contains everything required to feed and pressurize closed hydronic heating or cooling systems in a neat, simple package that is easy to install and operate. It is compatible with both water and water/glycol solutions.
Overview
Features & Benefits
- 227 litre (60 US gallon) tank for storage and mixing
- Plugs into any standard 115 VAC outlet
- Fluid level switch shuts the pump off if the storage tank level gets low
- Accumulator tank prevents excessive pump cycling
- No direct connection to potable water supply eliminates need for backflow prevention
- Make-up fluid stored in the feeder tank can be pre-treated
- Diverter valve for purging of air on initial start-up and manual agitation of solution
- Prevents major floods – in the event of system rupture, only the contents of the tank can be pumped into the system
- Provides leak detection – dropping fluid level provides immediate notice that the system has developed a leak
- Fluid drained for service can easily be put back into the system
- Flexible connection hose with system check valve makes installation easy
Specifications
| Specification | Value |
|---|---|
| Tank Capacity (USG) | 60 |
| Tank Capacity (Liters) | 227 |
| Pressure Range Min (PSI) | 5 |
| Pressure Range Max (PSI) | 55 |
| Number of Pumps | 1 |
Download Resources
Feeder Sizer
Use the calculator below to determine which System Feeder will best suit your application.